136
If Something Goes Wrong
Display problems
Some computers may have an Advanced tab (or
similar) to change the touchpad properties.
3 You can now change the configuration settings of your
touchpad.
Display problems
Here are some typical display problems and their solutions:
The screen is blank.
Display Auto Off may have gone into effect. Press any key to
activate the screen.
If you are using the built-in screen, make sure the display
priority is not set for an external monitor. To do this, press
the
FN + ( ) keys. If this does not correct the problem,
press the
FN + ( ) keys again to return the display priority
to its previous setting.
HINT: Pressing the FN + ( ) keys several times will
advance you through the display options.
If you are using an external monitor:
❖ Check that the monitor is turned on.
❖ Check that the monitor’s power cord/cable is firmly
plugged into a working power outlet.
❖ Check that the cable connecting the external monitor to
the computer is firmly attached.
❖ Try adjusting the contrast and brightness controls on the
external monitor.
❖ Press the
FN + ( ) keys to make sure the display
priority is not set for the built-in screen.
The screen does not look correct.
To choose a theme for your desktop background:
1 In the
Search field, type Change the theme.
2 Click
Change the theme.
3 Select one of the available options.
NOTE
To Next Page
Loading...
Need help?
General
