112
Utilities
System Settings
❖ Boot Options—Allows you to change the sequence in
which your computer searches the drives for the
operating system
❖
Boot Priority—Allows you to configure boot priority
settings.
❖
Boot Speed—Reduces the time needed for the
BIOS to initialize, using either the Fast or Normal
settings.
❖
Panel open/Power on—Allows you to turn on the
computer when opening the display panel while the
computer is turned off.
❖
Power On By AC—Allows you to turn on the
computer by plugging in the AC adaptor.
❖
Keyboard—Allows you to access the wake-on
keyboard function, or to configure the function keys
❖
Function Key—Allows you to set options for the
notifications from the Function key
❖
USB—Allows you to enable or disable USB Legacy
Emulation and internal USB 3.0 controller
❖
Internal USB 3.0 Controller—Allows you to save
power. If disabled the USB 3.0 ports will function like
the USB 2.0 ports.
❖
System ON CDP Charge Mode—Allows you to
enable CDP (Charging Downstream Port) to use
rapid USB charge while the computer is powered
on.
❖
SATA—Allows you to set conditions for SATA
❖
LAN—Allows you to set networking functions
❖
ODD Tray Lock—Allows you to set the condition for the
ODD tray lock
❖
Undock and Sleep—Allows you to set sleep
conditions when undocking
To Next Page
Loading...
Need help?
General
