Toshiba THP700-IP - 5 Maintenance; Maintenance and Inspection Items; Inspection in Power-Off State (Non-Operating State)

DUST- & DRIP-PROOF TYPE SPECIFICATIONS MANUAL
5. Maintenance
The basic structure of the dust- and drip proof type robot is the same as that of the
standard robot. For the contents of inspection, etc., see the THP700 Maintenance
Manual provided separately.
This section deals with the layout of the robot mechanical components and the
procedures for mounting and dismounting the covers and for replacing the bellows.
5.1 Maintenance and Inspection Items
Maintenance is classified into the following categories: daily routine inspection, and
maintenance/inspection carried out at regular intervals.
This section shows maintenance/inspection items. For details on maintenance and
replacement, see the corresponding reference section.
5.1.1 Inspection in Power-Off State (Non-operating State)
Inspection item Component inspected
Daily
inspection
Quarterly
inspection
Semi-annual
inspection
Annual
inspection
Reference
section
Check for an air leak. Arm-2 cover { { { {
Check the bellows for a
break.
Upper and lower bellows { { { {
STE85336
– 28 –