DUST- & DRIP-PROOF TYPE SPECIFICATIONS MANUAL
STE85336
– 35 –
Also, apply the Loctite adhesives to all set bolts.
!
CAUTION
• Do not forget to install the gasket.
Also, be sure to coat the Loctite adhesives to all set bolts. Otherwise, the
dust- and drip-proof performance is damaged to cause entry of water or
dust.
• Be sure to replace the gasket before it is damaged. Damaged gasket
causes the deterioration of the dust- and drip-proof performance.
1) The cover that also serves as the battery box is secured together with the gasket
to the base by tightening four cross-recessed truss head screws (M4
×6). As the
cover is connected with the connectors inside, DO NOT pull out the cover by force.
Fig. 5.5 Cover concurrently used for battery box
Also, apply the Loctite adhesives to all set bolts.
!
CAUTION
• Do not forget to install the gasket.
Also, be sure to coat the Loctite adhesives to all set bolts. Otherwise, the
dust- and drip-proof performance is damaged to cause entry of water or
dust.
• Be sure to replace the gasket before it is damaged. Damaged gasket
causes the deterioration of the dust- and drip-proof performance.
Gaske
Cover co
used for battery box
ncurrently
To Next Page
Loading...
