34/68
C. Clip solid tyres
1. Place the support plate in the centre of the solid tyre press.
2. Place the tyre in the centre of the support plate.
3. Press the DOWN button to release the tyre from the rim.
4. Place the disassembly ring in the groove between the tyre and
the rim.
5. Press the UP button to raise the flange plate fully upward.
6. Remove the tyre.
7. Remove the support plate.
8. Turn the cage.
9. Place the tyre back in the centre of the cage.
10. Place the correct cones.
To Next Page
Loading...