6/68
1. INTRODUCTION
This manual contains all the necessary information on the installation and operation of
the solid tyre press. Some of the maintenance operations should only be carried out by
professional technicians.
If you require this information and the maintenance steps, please contact your dealer.
Also included in this manual are a number of safety instructions to create a safe working
environment.
The solid tyre press is an indispensable piece of equipment for tyre mounting and
maintenance of solid tyres. The solid tyre press is a stationary model. It has the merit of
being easy to operate and of delivering reliable performance.
This solid tyre press uses a hydraulic and an electrical system.
The solid tyre press is only suitable for the assembly and disassembly of solid rubber tyres
on metal
rims. The type plate shows the maximum tyre dimensions that can be handled.
Please read the manual thoroughly and observe the safety procedures before putting the
unit into operation. The operator and all persons who come into contact with the equipment
should read it carefully and regularly and have access to it at all times.
Keep this manual near the equipment and in a safe place for future reference!
Contact your dealer for any further questions or concerns you may have.
We hope you will enjoy working with your solid tyre press.
If you wish to use this solid tyre press in extreme conditions such as extreme heat,
extreme cold, extreme drought, etc., please contact your dealer to discuss whether
this product is suitable for the activities you wish to undertake with the solid tyre
press.
Consult the manual of the truck and/or trailer to know where to place the trailer safety jack.
To Next Page
Loading...