7/68
This solid tyre press may be unsafe if adequate maintenance is neglected. Therefore,
adequate maintenance facilities, trained personnel and procedures should be
provided.
Maintenance and inspection shall be performed in conformity with the following
practices:
1. A scheduled planned maintenance, lubrication and inspection system should be
followed (see maintenance instructions chapter8).
2. Only qualified and authorised personnel shall be permitted to maintain, repair,
adjust and inspect the solid tyre press.
3. Modifications and additions which affect capacity and safe operation shall not
be performed by the customer or user without the manufacturer’s prior written
approval. Capacity, operation and maintenance plates or decals shall be changed
accordingly.
4. If modifications are made without the written approval of the manufacturer,
thewarranty will no longer apply.
Any person in charge of putting the machine into operation, the operation itself or
the maintenance of the machine is urged to carefully read and observe the following
instructions.
Make sure that the operators of this product are familiar with the safety instructions
and follow all the procedures. Neglecting these instructions can lead to injury or
death.
We guarantee a long period of trouble-free operation if the unit is operated and
maintained correctly.
To Next Page
Loading...