tousek PULL T8 - Page 30

- 30 - tousek / EN_PULL-T8-T10-T15-M-S_02 / 25. 03. 2020
After giving the
impulse to program
the end positions, no
other impulse must be
given. Also the safety
devices mustn´t be
triggered. This would
lead to an interruption
of the programming
process.
5
Conrm
additional options (with „-“ button):
 radio edge TX
 TX 400
7
5
6
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
Side safety edge $$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
Side safety edge
active
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
Side safety edge
not active
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
Opening
direction
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
Opening direct.
<<<--- left
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
Opening direct.
--->>> right
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
Operation mode $$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
Operation mode
Impulse mode
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
Operation mode
auto. close 5s
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
Operation mode
aut. close 10s
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
System test
Photocell
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
System test
Main safety edge
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
System test
Side safety edge
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
End positions
being detected
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
Open position
being detected
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
Close position
being detected
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
Ready for use
5
6
7
8
Conrm
Conrm
Conrm
Time:
1–255s
e.g. 10s
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
System test
PULL T Slave
Change ? YES
Change ? YES
Change ? YES
Impulse with
impulse button
or transmitter.