TOX PRESSOTECHNIK CEP400T - Analyzing NOK Situations

Troubleshooting
100
TOX_Manual_Process-monitoring-unit_CEP400T_en
9.1.2 Analyzing NOK situations
A
B
C
D
kN
t
Stroke (punch
travel)
Pressing force
control by
force sensor
Control dimension ‘X‘
monitoring by precision limit caliper
Error source Meaning
a Measuring point OK (measuring point is within the window)
B Press force too high (Display: Error code <MAX>)
C Press force too low (Display: Error code <MIN>)
D No measurement (No change to display; 'ready to mea-
sure' signal remains present, no edge transition)
Tab.19 Error sources