TOX PRESSOTECHNIK CEP400T - Product Identification

About this product
18
TOX_Manual_Process-monitoring-unit_CEP400T_en
3.2 Product Identification
3.2.1 Position and content of the type plate
The type plate can be found on the back of the device.
Designation on the type plate Meaning
Type Product designation
ID No Material number
SN Serial number
Tab.1 Type plate
Type code structure
Setup and function of process monitoring CEP 400T-02/-04/-08/-12 are
similar to a large extent. The number of measurement channels differenti-
ates the devices:
Type key Description
CEP 400T-02: Two separate measurement channels 'K1' and
'K2'.
CEP 400T-04: Four separate measurement channels 'K1' to 'K4'.
CEP 400T-08: Eight separate measurement channels 'K1' to 'K8'.
CEP 400T-12: Twelve separate measurement channels 'K1' to
'K12'.