Software
TOX_Manual_Process-monitoring-unit_CEP400T_en
67
Load parameters from USB stick
ü The user is logged in with a suitable user level. The necessary write
permissions are available.
ü USB stick is inserted.
è NOTE!Data loss! The old parameters in the target process are over-
written by copying.
Tap theLoad the parameters from the USB stick button.
w The parameters are read from the USB stick.
8.4.2 Configuration
The process-dependent parameters of warning limit and force sensor are
set in the ''Configuration'' menu.
Fig.21 ''Configuration'' menu
To Next Page
Loading...