Software
68
TOX_Manual_Process-monitoring-unit_CEP400T_en
Naming the channel
ü The user is logged in with a suitable user level. The necessary write
permissions are available.
1. Tap on the Naming input field.
w The alphanumeric keyboard opens.
2. Enter the channel (max. 40 characters) and confirm with ↲.
Setting warning limit and measuring cycles
With these settings the values are preset globally for all processes. These
values must be monitored by the overriding control system.
Setting the warning limit
The value fixess the warning limit with regard to defined tolerance windows
that are defined in the process.
ü The user is logged in with a suitable user level. The necessary write
permissions are available.
1. Tap on Warning limit: [%] input field.
w The numerical keyboard opens.
2. Enter a value between 0 and 50 and confirm with ↲.
Deactivating the warning limit
ü The user is logged in with a suitable user level. The necessary write
permissions are available.
1. Tap on Warning limit: [%] input field.
w The numerical keyboard opens.
2. Enter 0 and confirm with ↲.
To Next Page
Loading...