TOX PRESSOTECHNIK CEP400T - Wall-Mounted Housing: Pin Assignment of Force Transducer

Technical data
42
TOX_Manual_Process-monitoring-unit_CEP400T_en
4.11.3 Wall-mounted housing: pin assignment of force transducer
A 17-pin plug is available for each of 4 channels.
Pin Signal name Type
Input/Out-
put
Notes
1 E+ K1 o Supply DMS V+, channel 1 / 5 / 9
2 E+ K3 o Supply DMS V+, channel 3 / 7 / 11
3 E-K1 o Supply DMS V-, channel 1 / 5 / 9
4 S+ K1 I Measuring signal DMS +, channel 1 / 5 /
9
5 E+ K2 o Supply DMS V+, channel 2 / 6 / 10
6 S- K1 I Measuring signal DMS -, channel 1 / 5 / 9
7 S+ K2 I Measuring signal DMS +, channel 2 / 6 /
10
8 E- K2 o Supply DMS V-, channel 2 / 6 / 10
9 E- K3 o Supply DMS V-, channel 3 / 7 / 11
10 S- K2 I Measuring signal DMS -, channel 2 / 6 /
10
11 S+ K3 I Measuring signal DMS +, channel 3 / 7 /
11
12 S- K3 I Measuring signal DMS -, channel 3 / 7 /
11
13 E+ K4 o Supply DMS V+, channel 4 / 8 / 12
14 E- K4 o Supply DMS V-, channel 4 / 8 / 12
15 S+ K4 I Measuring signal DMS +, channel 4 / 8 /
12
16 Reserve
17 S- K4 I Measuring signal DMS -, channel 4 / 8 /
12