Transport and storage
TOX_Manual_Process-monitoring-unit_CEP400T_en
51
5 Transport and storage
5.1 Temporary storages
Use original packaging.
Make sure that all electrical connections are covered to prevent dust
ingress.
Protect the display against sharp-edged objects e.g. due to cardboard
or hard foam.
Wrap the device, e.g. with a plastic bag.
Store the device only in closed, dry, dust-free and dirt-free rooms at
room temperature.
Add drying agent to the packaging.
5.2 Dispatch for repair
If the device is sent to TOX
®
PRESSOTECHNIK for repair, the following in-
formation is required:
Detailed description of the fault
Operating conditions and installations e.g. upstream devices, etc.
Contact person at TOX
®
PRESSOTECHNIK
Contact person at your company in case of questions
For additional information and forms see
http://www.tox-pressotechnik.com/.
To Next Page
Loading...