TOX PRESSOTECHNIK CEP400T - Pulse Diagrams; Measuring Mode

Technical data
46
TOX_Manual_Process-monitoring-unit_CEP400T_en
Status Designation
1 Measure active
2 OK
3 NOK
4.14 Pulse diagrams
4.14.1 Measuring mode
This description applies to versions without warning limit monitoring and
number of pieces monitoring.
Signal name Type:
Input "I" / Output "O"
Designation
A0 o Part is OK (OK)
A1 o Part is not OK (NOK)
A6 o Measure active
A5 o Ready for measurement (ready)
E6 I Start measurement
Tab.14 Basic device signals
The contacts in the plug connector depend on the shape of the housing;
see pin allocation of wall-mounted housing or mounting version.
1
0
1
0
1
0
1
0
1
0
1 2 3 4 5 2 3 4 5
Cycle IO Cycel NIO
IO (O1)
NIO (O2)
Meas. running (O7)
Ready (O6)
Start (I7)
Fig.7 Sequence without warning limit/number of pieces monitoring.