TOX PRESSOTECHNIK CEP400T - Valuation Options

Software
TOX_Manual_Process-monitoring-unit_CEP400T_en
95
8.4.5 Valuation options
If an acknowledgement type (acknowledgement external or per display)
was selected, a NOK measurement must be acknowledged before the
pressing monitor is ready to measure again.
5
1
2
3
4
Fig.28 ''Configuration \ NIO options'' menu
Button Function
1 External NOK acknowledgement The NOK message must always be ac-
knowledged via an external signal.
2 NOK acknowledgement per dis-
play
The NOK message must be acknowl-
edged via the display.
3 Separate measurement of chan-
nels
The measurement for channel 1 and
channel 2 can be started, ended and
evaluated separately.
Only available with a process monitoring
system with 2 channels.
4 With password The NOK message can only be acknowl-
edged via the display after the entry of
the password.