Software
96
TOX_Manual_Process-monitoring-unit_CEP400T_en
Activate external NOK acknowledgement
ü The user is logged in with a suitable user level. The necessary write
permissions are available.
1. Tap on external NOK acknowledgement checkbox to activate exter-
nal acknowledgement.
2. Tap on the Accept button to save the values.
Activating NOK acknowledgement per display
ü The user is logged in with a suitable user level. The necessary write
permissions are available.
1. Tap on NOK acknowledgement per display checkbox to activate the
acknowledgement per display.
2. Tap on the checkbox With password to enter the password of autho-
rization level 1, the one who can perform the acknowledgment.
3. Tap on the Accept button to save the values.
Separate measurement of channels
In case of a 2-channel device, the measurement for channel 1 and channel
2 can each be started, ended and evaluated separately.
ü The user is logged in with a suitable user level. The necessary write
permissions are available.
ü The device is 2-channel capable.
1. Tap on external NOK acknowledgement checkbox to activate exter-
nal acknowledgement.
2. Tap on the Measure channels separately button to display the status
of the measurement carried out last.
To Next Page
Loading...