Technical data
30
TOX_Manual_Process-monitoring-unit_CEP400T_en
On devices with field bus interface, the outputs are written on both the digi-
tal outputs and the field bus outputs. Whether the inputs are read on the
digital inputs or on the field bus inputs is selected in menu '''Additional
\Communication parameters\Field bus parameters'''.
Fig.5 Connection example of digital inputs / outputs
Pin, D-SUB 25 OK Color code Standard CEP
400T
CEP 200 IO
(Option, see
Networking
via Ethernet
(Option),
Page 21)
14 I0 White Program bit 0 Measure
15 I1 Brown Program bit 1 Reserve
16 I2 GREEN Program bit 2 Test plan se-
lection bit 1
17 I3 YELLOW Program bit 3 Test plan se-
lection bit 2
18 I4 *Grey Program
strobe
Test plan se-
lection bit 4
To Next Page
Loading...