TOX PRESSOTECHNIK CEP400T - Page 36

Technical data
36
TOX_Manual_Process-monitoring-unit_CEP400T_en
Pin MIO
1 RTX
2 RTX
3 GND
4 GND
7 GND
8 GND
NOTE
Service-Pins
All Service-Pins are only provided for factory alignment and must not be
connected by the user
USB
Description Value
Number of channels 2 x host (full-speed)
1 x device (high-speed)
USB 2.0 According to USB device specification,
USB 2.0 compatible, type A and B
Connection to high-powered hub/host
Max. cable length 5 m
Pin MIO
1 + 5 V
2 Data -
3 Data +
4 GND
Ethernet
1 channel, twisted pair (10/100BASE-T),
Transmission according to IEEE/ANSI 802.3, ISO 8802-3, IEEE 802.3u
Description Value
Transmission speed 10/100 Mbit/s
Connecting line Shielded
at 0.14mm²: max. 300m
at 0.25 mm²: max. 600 m
Length Max. 100 mm
Cable Shielded, impedance 100 Ω