Toyota 2012 Auris - Page 139

139
1. SETUP OPERATION
5
SETUP
AURIS_HB_WGN_HV_Navi_EE
14.03.12 15:00
PAIRING FROM THE DEVICE
1 Select “Make system discoverable”.
When another Bluetooth
®
device is al-
ready connected, a message will ap-
pear.
 To disconnect the Bluetooth
®
device,
select “YES”.
When 4 Bluetooth
®
devices have al-
ready been paired, a message will ap-
pear.
 A paired device needs to be replaced.
Select “OK”, and select the device to be
replaced.
2 When this screen is displayed, search
for the system on the screen of your
Bluetooth
®
device.
 To cancel the registration, select
“Cancel”.
3 Pairing the Bluetooth
®
device using
your Bluetooth
®
device.
 A PIN code is not required for SSP
(Secure Simple Pairing) compatible
Bluetooth
®
devices. Depending on the
type of Bluetooth
®
device being con-
nected a message confirming registration
may be displayed on the Bluetooth
®
device’s screen. Respond and operate the
Bluetooth
®
device according to the confir-
mation message.
LOGIN PROCESS INTERNET PRO-
FILE
If “Connect for Internet” is selected
1 Select “Connect for Internet”.
 If the automatic connection failed, the fol-
lowing screen will be displayed. Select the
desired provider to be connected.
2 Select the desired provider.
3 Select “Provider username”,
“Provider password” or “APN” and
enter the name, password or APN.
4 Select “Confirm provider
information”.