140
1. SETUP OPERATION
AURIS_HB_WGN_HV_Navi_EE
14.03.12 15:00
If is selected
1 Select .
2 Follow the steps “LOGIN PROCESS
INTERNET PROFILE” from “STEP 2”.
(P.139)
RECONNECTING Bluetooth
®
DE-
VICE
If the Bluetooth
®
device is disconnected
on purpose, such as it was turned off, this
does not happen. Reconnect it manually
using either of the following methods:
• Select a Bluetooth
®
device again.
(P.143)
• Connect the audio profile/phone profile.
(P.141)
If a Bluetooth
®
device is disconnected
due to poor reception from the
Bluetooth
®
network when the engine
switch is in the following, the system
automatically reconnects the
Bluetooth
®
device.
Vehicles with a smart entry & start sys-
tem
The power <engine> switch is turned
to ACCESSORY or ON <IGNITION
ON> mode.
Vehicles without a smart entry & start
system
The engine switch is turned to the
“ACC” or “ON” position.
To Next Page
Loading...
