Toyota 62-8FDU25 User Manual

8-172 8 TROUBLESHOOTING
Control type
Phenomenon on
vehicle
Malfunction area
and mode
Checking method Corrective action
Active mast function
control
Mast backward tilt-
ing speed is not lim-
ited.
Or, backward tilting
speed is always
slow.
▪ Automatic fork
leveling switch
unit:
Open fault (in-
ternal damage)
▪ Automatic fork
leveling switch
detection mech-
anism (mini
lever, joystick
lever):
Detection part
gap adjustment
defect
▪ Automatic fork
leveling switch
line (Power sup-
ply, signal,
ground):
Disconnection
fault (Harness,
connector)
ON/OFF check with
analyzer
Harness check or re-
place switch
▪ C/V tilt control
valve:
Stuck (internal
damage)
Turn the tilt solenoid
ON/OFF and oper-
ate to backward tilt
using an active test.
If there is no change
in the backward tilt-
ing speed when ON/
OFF operated, re-
place the C/V tilt
control valve.
▪ Lifting height
switch unit
(2200H):
Disconnection
fault (internal
damage, stuck)
ON/OFF check with
analyzer
Harness check or re-
place switch
▪ SAS/OPS con-
troller:
Controller defect
- Replace

Toyota 62-8FDU25 Specifications

General

Brand	Toyota
Model	62-8FDU25
Category	Forklifts
Language	English