7-597 DISPLAY
3. Eco-mode indicator
▪ This indicator lights and goes off alternately when the oper-
ator presses the mode select switch. The Eco-mode func-
tion is effective when this indicator lights.
But this indicator cannot be switched by pressing the mode
select switch when the menu lock is effective.
4. Maintenance indicator
▪ When the elapsed time of the maintenance hour meter ex-
ceeds the preset hours, this indicator is displayed to inform.
The buzzer also sounds for 5 seconds whenever the key
switch is turned on under the above condition.
However, the buzzer doesn't sound at that time when the
elapsed time has just exceeded the preset hour while the
vehicle is in operation. (The indicator is displayed during
operation).
The preset hour is set on the administrator menu screen.
5. Menu lock indicator
▪ When Menu Lock setting is “YES”, the Menu lock indicator
is displayed.
When the Menu lock indicator is displayed, if the operation
for opening “operator menu” is executed (Pressing switch
(1) for more than 2 seconds on the status screen), the dis-
play informs the operator that the operation is invalid with
blinking of the indicator.
Eco-mode is not switched when the Menu lock indicator is
displayed.
7
To Next Page
Loading...
Need help?
General
