EasyManua.ls Logo

Toyota 7FDA50 - Body Components

Toyota 7FDA50
203 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
En
BODY COMPONENTS
Operator’s seat
The operator’s seat and seat belt are provided
for your safety.
The seat can be moved back and forth for posi-
tion adjustment while the adjust lever is pulled
upward.
Suspension seat
The seat suspension mechanism provides a com-
fortable seating position according to the weight
of the driver. The optimum driving position can
be set using the knob and levers.
q Seat slide lever
Pull the slide lever to the left, to adjust the back-
and-forth position of the seat. The seat is secured
in position when you release the lever.
w Recliner adjust lever (Option)
Pull the lever on the left to adjust the seat’s an-
gle of recline.
e Weight adjust knob (Option)
Turn the knob on the right of the seat clockwise
to adjust for a heavier body weight.
Turn the knob counterclockwise to adjust for a
lighter body weight. Adjustment can be made
for body weights between 40 kg and 120 kg.
r Seat belt
Caution
After adjustment, lightly shake the seat for-
ward and backward to confirm that the seat
is firmly locked in position.
Pocket
An operator’s manual and operator’s manual for
safety operation are located on the rear side of
the seat. Make sure to open the seat back pocket
with both hands. If your truck does not have an
operator’s manual and operator’s manual for
safety operation, please contact (your authorized
Toyota Dealer)to obtain copies for your truck.
Note: Make sure the pocket is closed securely.
q
e
r
w
q
q Lower
Tilt steering adjustment
1. The steering wheel position may be adjusted
back and forth while the tilt steering adjust le-
ver is kept lowered.
2. Raising the lever at the proper position fixes
the steering wheel at that position.
3. After the adjustment, try to move the steer-
ing wheel back and forth to see that it is fixed.
Caution
The steering wheel position must be adjusted
before starting the vehicle.
Adjustment during traveling must be
avoided.
Pedals
(Clutch models)
From the right: accelerator pedal, brake pedal
and clutch pedal.
(Torque converter models)
From the right: accelerator pedal, brake pedal
and inching pedal.

Table of Contents