En
33
PROTECT YOUR INVESTMENT WITH TOYOTA
GENUINE PARTS
Why gamble with your valuable assets? When your forklift needs periodic maintenance - as every
forklift does - you need Toyota Genuine Parts.
The same parts used on Toyota assembly lines - meeting the same tough Toyota standards for “PER-
FORMANCE”, “DURABILITY”, and “SAFETY”.
TOYOTA GENUINE PARTS
Offer Excellent Dust-catching Performance on:
e.g. Air Element, Torque converter Oil Filter
Return Oil Filter, Engine Oil Filter
Fuel Filter
TOYOTA GENUINE PARTS
Offer Supreme Durability on:
e.g. Clutch Disc
Radiator Hose
V Belt
TOYOTA GENUINE PARTS
Offer Added Safety on:
e.g. Lift Roller
Lift Chain
Tie-rod End
Brake Shoe
Call your Toyota authorized shop for after-sale service.
With high quality TOYOTA genuine parts and superior service
technology, Toyota help keep customers forklifts in the best con-
dition for efficient work and higher productivity. We deliver sat-
isfaction to the customers with Toyota genuine part.
IF YOU USE A NON-GENUINE ENGINE OIL FILTER:
1. Clogging may result, which can lead to engine
seizure.
2. The engine oil may become dirty faster,
necessitating frequent oil changes.
3. It can pass dirty oil to the engine, causing
engine wear.
IF YOU USE A NON-GENUINE RADIATOR HOSE:
1. The hose may wear out extremely rapidly.
2. The hose may be susceptible to water leakage,
necessitating frequent replacement.
IF YOU USE A NON-GENUINE BRAKE SHOE:
1. Braking performance may be excessive,
insufficient, or erratic, which is dangerous.
2. The brakes may drag. wasting fuel or battery
power.
PERIODIC MAINTENANCE
Periodic inspection and maintenance are neces-
sary to keep your Toyota industrial vehicle run-
ning smoothly. The designated number of hours
in the inspection cycle are as follows.
Daily (pre-operation check) ....Every 8 hours
Weekly .................................... Every 40 hours
6 weeks .................................. Every 250 hours
3-month ................................. Every 500 hours
6-month .............................. Every 1,000 hours
Annually ............................ Every 2,000 hours
If operation time exceeds 250 hours within 6
weeks use the number of hours as the guide for
performing periodic inspection. Pre-operation
checks and weekly inspections should prefer-
ably be performed by the user. 6 weeks, 3-month,
6-month and annual inspection should be per-
formed by a Toyota dealer since high-level tech-
nology and special tools are required.
Refer to the periodic maintenance table to de-
termine inspection and maintenance items and
inspection cycles.
Use only genuine Toyota parts for replacement
parts, and use the recommended types of lubri-
cants.
PERIODIC REPLACEMENT TABLE
EVERY
6 WEEKS
3 6 12 MONTHS
EVERY 250 500 1000 2000 HOURS
Engine oil ● ,,,
Engine oil filter ●* ● ,,
Cooling water (except LLC, LLC is every 2 years) ● ,,
Air cleaner element ●
Fuel filter ● ,
Torque converter oil ● ,
Torque converter oil filter ● ,
Manual transmission oil ●
Differential gear oil ●
Hydraulic oil ● ,
Hydraulic oil filter ●* ● ,
Wheel bearing grease ●
Spark plugs ● ,
Brake booster rubber parts ●
Master cylinder, wheel cylinder cap and seals ●
DPF inline filter (Option) ● ,
Power steering hose (Every 2 years)
Power steering rubber parts (Every 2 years)
Hydraulic hose (Every 2 years)
Fuel hose (Every 2 years)
Torque converter rubber hose (Every 2 years)
Chain (Every 3 years)
DPF muffler filter (Option) (Every 3 years)
DPF air cleaner (Option) (Every 2 years)
Swing lock cylinder (SAS models) (Every 10,000 hours)
*For new vehicles
REPLACEMENT PERIOD (Accumulated hours
of operation or monthly periods of operation,
whichever comes sooner.)
Note: In case of the hard operating condition, the service interval of 170 hours or 1 month may be
recommendable.
To Next Page
