EasyManua.ls Logo

TP-Link AC1750 - Ipv6 Support

TP-Link AC1750
143 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Archer C8
AC1750 Wireless Dual Band Gigabit Router
- 101 -
Figure 5-94 No-ip.com DDNS Settings
To set up for DDNS, follow these instructions:
1. Enter the User Name for your DDNS account.
2. Enter the Password for your DDNS account.
3. Enter the Domain Name you received from dynamic DNS service provider.
4. Click the Login button to login to the DDNS service.
Connection Status - The status of the DDNS service connection is displayed here.
Click Logout to log out the DDNS service.
Note:
If you want to login again with another account after a successful login, please click the Logout
button, then input your new username and password and click the Login button.
5.18 IPv6 Support
Figure 5-95 IPv6 Support
There are two submenus under the IPv6 Support menu (shown in Figure 5-95): IPv6 Status and
IPv6 Setup. Click either of them, and you will be able to scan or configure the corresponding
function. The detailed explanations for each submenu are provided below.

Table of Contents

Other manuals for TP-Link AC1750

Related product manuals