TP-Link AC1750 - Page 53

Archer C8
AC1750 Wireless Dual Band Gigabit Router
- 42 -
Figure 5-18 WPA/WPA2 – Personal
 Wireless Password - You can enter ASCII characters between 8 and 63 characters or 8
to 64 Hexadecimal characters. The default password is the same with the default PIN
code, which is labeled on the router or can be found in Figure 5-15.
 Group Key Update Period - Specify the group key update interval in seconds. The
value should be 30 or above. Enter 0 to disable the update.
 WPA/WPA2- Enterprise - It’s based on Radius Server. If you choose WPA/WPA2 -
Enterprise, WPS function will be disabled.
 Version - you can choose the version of the WPA security on the drop-down list. The
default setting is Automatic, which can select
WPA (Wi-Fi Protected Access) or WPA2
(WPA version 2) automatically based on the wireless station's capability and request.
 Encryption - You can select either Automatic, or TKIP or AES.

Note:
If you check the WPA/WPA2-Enterprise radio button and choose TKIP encryption, you will
find a notice in red as shown in Figure 5-19.
Figure 5-19 WPA/WPA2 - Enterprise
 Radius Server IP - Enter the IP address of the Radius server.
 Radius Port - Enter the port number of the Radius server.
 Radius Password - Enter the password for the Radius server.