EasyManua.ls Logo

TP-Link AC50 - System Log Management

TP-Link AC50
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
103
RX Rate (Kb/s) Displays the rate data frames are received.
TX Packet Rate (Pkt/s) Displays the rate data packets are transmitted.
Total TX Bytes Displays the total bytes transimitted by the interface.
Total RX Bytes Displays the total bytes received by the interface.
Total TX Packets Displays the total packets transmitted by the interface.
Total RX Packets Displays the total packets received by the interface.
9.4 Diagnostics
Choose the menu System Tools > Diagnostics > Diagnostics to load the following page.
Figure 9-9 Diagnostics
Here you can use the diagnostic tools to detect the current network connection status.
The device provides Ping and Traceroute tools to help you troubleshoot network
connection problems.
The Ping tool sends packets to a target IP Address or Domain Name and logs the results,
such as the number of packets sent and received, and the round-trip time.
The Traceroute tool sends packets to a target IP Address or Domain Name and displays
the number of hops and time to reach the destination.
Diagnostic Tool Specify the diagnostic tool as Ping/Traceroute.

Table of Contents

Related product manuals