EasyManua.ls Logo

TP-Link AC50 - Page 45

TP-Link AC50
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
41
Figure 6-4 Security of WPA/WPA2
Authentication Type Select one of the following versions:
Auto: Select WPA-PSK or WPA2-PSK automatically based on the wireless
station's capability and request.
WPA: Wi-Fi Protected Access.
WPA2: Version 2 of WPA.
Encryption Select the encryption type, including Auto, TKIP, and AES. The default setting is
Auto, which can select TKIP (Temporal Key Integrity Protocol) or AES (Advanced
Encryption Standard) automatically based on the wireless station's capability
and request. AES is more secure than TKIP and TKIP is not supported in
802.11n mode. It is recommended to select AES as the encryption type.
Group Key Update
Period
Enter the number of seconds (minimum 30) to control the time interval for the
encryption key automatic renewal.
Radius Server IP Enter the IP address of the Radius server.
Radius Port Enter the port number of the Radius server.
Radius Password Enter the share key of the Radius server.
Click button, you can go into the radio binding page.
Figure 6-5 Radio Banding

Table of Contents

Related product manuals