24
Before configuring the wireless parameters on each band, check the box to enable
Wireless Radio. Only when this option is enabled will the wireless radio on the
corresponding band works.
Demonstrated with 2.4GHz.
2.1.1 Configure SSIDs
SSID (Service Set Identifier) is used as an identifier for a wireless LAN, and is commonly
called as the “network name“. Clients can find and access the wireless network through
the SSID.
Follow the steps below to create an SSID on the AP:
1. Choose a frequency band on which the new SSID will be created.
To Next Page
Loading...
