66
3.1 Monitor the AP
To monitor the AP information, go to the Status > Device page.
The following device information is displayed:
Device Name Displays the name of the AP. The name consists of the product model
followed with the MAC address of the AP by default.
Device Model Displays the product model of the AP.
Firmware Version Displays the current firmware version the AP. To update the firmware,
you can refer to
5.6 Update the Firmware
.
Hardware Version Displays the hardware version the AP.
MAC Address Displays the MAC address of the AP.
IP Address Displays the IP address of the AP.
Subnet Mask Displays the subnet mask of the AP.
System Time Displays the current system time. To configure the system time, you can
refer to
5.3 Configure the System Time
.
Uptime Displays how long the AP has been working since it starts up.
To Next Page
Loading...
