101
Chapter 6
Configure the Router in Range Extender Mode
• Apply To - Select the day or days you need the wireless off.
• Start Time, End Time - You can select all day-24 hours or you may enter the Start Time
and End Time in the corresponding field.
• Add - Click to add your selected time to the below table.
• Clear Schedule - Click to clear your settings in the table.
6. 5. 4. Wireless MAC Filtering
Wireless MAC Filtering is used to deny or allow specific wireless client devices to access
your network by their MAC addresses.
I want to:
Deny or allow specific wireless client devices to access my network by their MAC
addresses.
For example, you want the wireless client A with the MAC address 00:0A:EB:B0:00:0B
and the wireless client B with the MAC address 00:0A:EB:00:07:5F to access the router,
but other wireless clients cannot access the router
How can I do that?
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
To Next Page
Loading...
