90
Chapter 5 Congure the Router in Access Point Mode
5. 9. 6. Factory Defaults
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to System Tools > Factory Defaults. Click Restore to reset all settings to the
default values.
• The default IP Address: 192.168.0.1
• The default Subnet Mask: 255.255.255.0
5. 9. 7. Backup & Restore
The configuration settings are stored as a configuration file in the router. You can
backup the configuration file in your computer for future use and restore the router to
the previous settings from the backup file when needed.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to System Tools > Backup & Restore.
• To back up configuration settings:
Click Backup to save a copy of the current settings in your local computer. A “.bin“ file
of the current settings will be stored in your computer.
To Next Page
Loading...
