43
Chapter 4 Congure the Router in Wireless Router Mode
4. 12. Access Control
Access Control is used to deny or allow specific client devices to access your network
with access time and content restrictions.
I want to:
Deny or allow specific client devices to access my network with access tiem and
content restrictions.
For example, If you want to restrict the internet activities of host with MAC address 00-
11-22-33-44-AA on the LAN to access www.tp-link.com only, please follow the steps
below:
How can I do that?
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Access Control > Host and configure the host settings:
1 ) Click Add New.
2 ) Select MAC Address as the mode type. Create a unique description (e.g. host_1)
for the host in the Description field and enter 00-11-22-33-44-AA in the MAC
Address filed.
To Next Page
Loading...
