32
Chapter 4 Congure the Router in Wireless Router Mode
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Guest Network.
3. Customize guest network permissions.
• Allow Guest To Access My Local Network - If enabled, guests can access the
local network and manage it.
• Guest Network Isolation - If enabled, guests are isolated from each other.
• Enable Guest Network Bandwidth Control - If enabled, the Guest Network
Bandwidth Control rules will take effect.
Note: The range of bandwidth for guest network is calculated according to the setting of Bandwidth Control on
the Bandwidth Control page.
4. Select a band and enable the Guest Network function.
5. Create a network name for your guest network.
6. Configure the Security type.
• To configure a secure network, select WPA/WPA2 - Personal and create a
password for the guest network.
• To set up Facebook Wi-Fi, disable wireless security, enable Facebook Wi-Fi,
click Set Up on Facebook, then follow the instructions to complete Facebook
Wi-Fi settings.
To Next Page
Loading...
