33
Chapter 6
USB Settings
Windows
computer
¾ Method 2:
Open the Windows Explorer (or go to Computer) and type the server
address \\tplinkmodem.net or ftp://tplinkmodem.net in the address
bar, then press Enter.
¾ Method 3:
Install an SFTP client (File Zilla) in your computer and configure
the protocal parameters (enter the LAN address of the router and
account username and password admin).
Mac
1 ) Select Go > Connect to Server
2 ) Type the server address smb://tplinkmodem.net.
3 ) Click Connect
4 ) When prompted, select the Guest radio box. (If you have set up
a username and a password to deny anonymous access to the
USB disks, you should select the Registered User radio box. To
learn how to set up an account for the access, refer to “To Set
up Authentication for Data Security”.)
Smart
device
Use a third-party app for network files management.
To Next Page
Loading...
