EasyManua.ls Logo

TP-Link Archer XR500v - Access the USB Device Remotely

TP-Link Archer XR500v
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
Chapter 6
USB Settings
6. 1. 2. Access the USB Device Remotely
You can access your USB disk outside the local area network. For example, you can:
Share photos and other large files with your friends without logging in to (and paying
for) a photo-sharing site or email system.
Get a safe backup for the materials for a presentation.
Remove the files on your camera’s memory card from time to time during your journey.
Note:
If your ISP assigns a private WAN IP address (such as 192.168.x.x or 10.x.x.x), you cannot use this feature because
private addresses are not routed on the internet.
Follow the steps below to configure remote access settings.
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Go to Advanced > USB Sharing > USB Storage Device page.
3. Select the check box to enable FTP (via Internet), then click Save.
4. Refer to the following table to access your USB disk remotely.

Table of Contents

Related product manuals