4
Chapter 1
Get to Know Your GPON Router
LED Explanation
LED Status
Indication
Power
On Power is on.
Off Power is off.
GPON
On The router is registered with the ISP.
Flashing The router is trying to register with the ISP.
Off The router is not yet registered with the ISP.
LOS
On The router is unable to transmit optical signal.
Flashing
No optical signal is received or the received signal
is too weak.
Off The router is receiving optical signal properly.
Internet
On Internet connection is available.
Flashing The router is transmitting or receiving data .
Off No Internet connection.
2.4GHz
On The 2.4GHz wireless radio band is enabled.
Flashing
The router is transmitting or receiving data via 2.4GHz
band.
Off The 2.4GHz wireless radio band is disabled.
5GHz
On The 5GHz wireless radio band is enabled.
Flashing
The router is transmitting or receiving data via 5GHz
band.
Off The 5GHz wireless radio band is disabled.
WPS
On/Off
Turns on when a WPS synchronization is established and
automatically turns off about five minutes later.
Flashing
A wireless device is trying to connect to the network via
WPS.
This process may take up to 2 minutes.
LAN
On
A device is connected to the LAN port but no data is
being transmitted.
Flashing The LAN port is sending or receiving data.
Off No device is connected to the LAN port.
PHONE
On The phone is off-hook.
Flashing The phone is ringing.
Off The phone is on-hook.
To Next Page
Loading...
