TP-Link EAP115 - Page 58

50
 Wireless Settings
Figure 6-49 Wireless Settings
Channel/Frequency:
Displays the channel number and the operating frequency. If you want
to change them, please refer to Radio in Cluster mode,
6.4.1.1 Wireless
Basic Settings in Standalone mode.
Channel Width:
Displays the spectral width of the radio channel used by the device. If
you want to change it, refer to Radio in Cluster mode,
6.4.1.1 Wireless
Basic Settings in Standalone mode.
IEEE802.11 Mode:
Displays the radio standard used for operation of your device. If you
want to change it, refer to Radio in Cluster mode,
6.4.1.1 Wireless Basic
Settings in Standalone mode.
Max TX Rate:
Displays the maximum data rate at which the device should transmit
wireless packets.
Transmit Power:
Displays the maximum average transmit power of the device. If you
want to change it, refer to Radio in Cluster mode, 6.4.1.1 Wireless Basic
Settings in Standalone mode.
 LAN Information
Figure 6-50 LAN Information
MAC Address:
Displays the MAC address of the device.
IP Address:
Displays the IP address of the device.
Subnet Mask:
Displays the subnet mask of the device.