Enter the description associated with the VRRP. Numbers,
characters and '_' are the only valid inputs, and the maximal
length of the inputs is 8.
Priority:
Enter the Priority associated with the VRRP. It ranges from 1
Enter the advertise timer associated with the VRRP. It ranges
from 1 to 255.
Preempt Mode: Select Enable or disable the preempt Mode from the pull-
ist. If you select Enable, a backup router will preempt the
master router if it has a priority greater than the master virtual
router's priority. The Preempt Mode is enabled by default.
Delay Time: Enter the delay time associated with the VRRP. It ranges
0 to 255.
Authentication:
Select the type of Authentication for the Virtual Router from the
pull-down list. The default is None.
None: No authentication will be performed.
Simple: Authentication will be performed using a text
password.
MD5: Authentic
ation of MD5 will be performed using a
If you select Simple or MD5 as authentication mode, enter the
key.
Apply: Click the button to submit the modified configuration.
10.10.3 Virtual IP Config
You can configure virtual IP for the virtual routers on this page. A virtual IP, which must be in the
subnet of an interface corresponding with the virtual router, can be added, deleted and
modified for the special virtual router.
Choose the menu Routing→VRRP→Virtual IP Config to load the following page.
Figure10-62 Virtual IP Config
To Next Page
Loading...
