the stack role of the member switch in the stack. There
are two options: Master and Slave.
MAC Address
Displays the MAC address of the member switch.
Priority:
Displays the member priority of the member switch. The higher the
value is, the more likely the member will be elected as the master.
Version: Displays the current firmware version of the member switch.
Status: Displays the stack status of the member switch.
Stack Port Info:
Stack Port: Displays the stack port number.
Status
Displays the stack port status.
Neighbor:
Displays the MAC address of the switch which is directly
connecting to the stack port.
5.1.2 Stack Config
On this page you can configure the basic parameters of the stack function.
Choose the menu Stack Management→Stack Config to load the following page.
Figure 5-8 Stack Config
To Next Page
Loading...
