Displays the period for the neighbor switch to keep the NDP
packets from this switch.
Hello Time: Displays the interval to send NDP packets.
Port Status
UN IT: Select the unit ID of the desired member in the stack.
Port: Displays the port number of the switch.
NDP: Displays the NDP status (enabled or disabled) for the current port.
Send NDP Packets: Displays the count of currently sent NDP packets.
Receive NDP Packets:
Displays the count of currently received NDP packets.
Error NDP Packets: Displays the count of currently received error NDP packets.
Neighbors: Displays the count of the connected neighbors.
LAG: Displays the LAG to which the port belongs.
Detail
button to view the complete information collected
for the port.
Clear: Clear NDP packets statistics.
The button on the bottom can clear
all statistics and the clear button in each line can clear the
statistics of the port which this line stands for.
17.1.3 NDP Config
On this page you can configure the NDP function for the switch.
Choose the menu Cluster→NDP→NDP Config to load the following page.
Figure 17-4 NDP Config
To Next Page
Loading...
