TP-Link JetStream T2700G-28TQ - Time-Range Create

283
13.1.2 Time-Range Create
On this page you can create time-ranges.
Choose the menu ACL→Time-Range→Time-Range Create to load the following page.
Figure 13-2 Time-Range Create
Note:
To successfully configure time-ranges, please firstly specify time-slices and then time-ranges.
The following entries are displayed on this screen:

Create Time-Range
Name: Enter the name of the time-range for time identification.
Holiday: Select Holiday you set as a time-range.
The ACL rule based on this
time-range takes effect only when the system time is within the holiday.
Absolute: Select Absolute to configure absolute time-range.
The ACL rule based
on this time-
range takes effect only when the system time is within the
absolute time-range.
Week: Select Week to configure week time-range. The ACL rule based o
n this
time-range takes effect only when the system time is within the
week
time-range.

Create Time-Slice
Start Time: Set the start time of the time-slice.
End Time: Set the end time of the time-slice.

Time-Slice Table
Index: Displays the index of the time-slice.
Start Time: Displays the start time of the time-slice.