TP-Link JetStream T2700G-28TQ - Log Table

379
Severity
Level Description
warnings 4
Warnings conditions
notifications 5
Normal but significant conditions
informational 6
Informational messages
debugging 7
Debug-level messages
Table 18-1 Log Level
The Log function is implemented on the Log Table, Local Log, Remote Log and Backup Log
pages.
18.2.1 Log Table
The switch supports logs output to two directions, namely, log buffer and log file. The information
in log buffer will be lost after the switch is rebooted or powered off whereas the information in log
file will be kept effective even the switch is rebooted or powered off. Log Table displays the system
log information in log buffer.
Choose the menu Maintenance→Log→Log Table to load the following page.
Figure18-3 Log Table
The following entries are displayed on this screen:

Log Info
UN IT:
Select the unit ID of the desired member in the stack.
Index:
Displays the index of the log information.