TP-Link JetStream T2700G-28TQ - Traffic Statistics

61
The following entries are displayed on this screen:

Auto Refresh
Auto Refresh:
Allows you to Enable/Disable refreshin
g the Traffic Summary
automatically.
Refresh Rate:
Enter a value in seconds to specify the refresh interval.

Traffic Summary
UN IT:
Select the unit ID of the desired member in the stack.
Port Select:
Click the Select button to quick-select the correspond
ing port based
on the port number you entered.
Port:
Displays the port number.
Packets Rx:
Displays the number of packets received on the port. The error
packets are not counted in.
Packets Tx:
Displays the number of packets transmitted on the port.
Octets Rx:
Displays the number of octets received on the port. The error octets
are counted in.
Octets Tx:
Displays the number of octets transmitted on the port.
Statistics:
Click the Statistics
button to view the detailed traffic statistics of the
port.
6.3.2 Traffic Statistics
Traffic Statistics screen displays the detailed traffic information of each port, which facilitates you to
monitor the traffic and locate faults promptly.