392
5) Enter 1 and y, the switch will reboot with the startup image.
Figure 19-10 Reboot with the startup image
6) Please 3 to start the switch shown as the following figure. After the switch is started, you
can login to the CLI command window and manage the switch via CLI command.
Figure 19-11 Start the switch
When you forget the login user name and password, you can enter 2 after entering into bootutil
menu to reset the system. The system will be restored to the factory default settings, and the
default user name and password for login the web page are both admin.
Return to CONTENTS
To Next Page
Loading...
