TP-Link JetStream T2700G-28TQ - Page 86

74
Choose the menu VLAN→802.1Q VLAN→VLAN Config to load the following page.
Figure 7-3 VLAN Table
To ensure the normal communication of the factory switch, the default VLAN of all ports is set to
VLAN1.
The following entries are displayed on this screen:

VLAN Table
Select
：
Select the desired entry to delete the corresponding VLAN. It is
multi-optional.
VLAN ID
：
Displays the ID number of VLAN.
Name
：
Displays the user-defined name of VLAN.
Members
：
Displays the port members in the VLAN.
Operation
：
Allows you to view or modify the information for each entry.
• Edit: Click to modify the settings of VLAN.
• Detail: Click to get the information of VLAN.
Click Edit button to modify the settings of the corresponding VLAN. Click Create button to create a
new VLAN.