60
Chapter 10
Network Security
3 ) Click Scan and select the device from the connected device list. The Device
Name and MAC Address will be automatically filled in. Or you can enter the
Device Name and MAC Address manually.
4 ) Click Save.
Done!
Now you can block or allow specific client devices to access your network (via wired or
wireless) using the Blacklist or Whitelist.
10. 4. IP & MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
a network device’s IP address to its MAC address. This will prevent ARP spoofing and
other ARP attacks by denying network access to a device with a matching IP address in
the Binding list, but an unrecognized MAC address.
I want to:
Prevent ARP spoofing and ARP attacks.
How can I do that?
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set
for the router.
2. Go to Advanced > Security > IP & MAC Binding and enable IP & MAC Binding.
To Next Page
Loading...
