85
Chapter 13
Specify Your Network Settings
1 ) Select the DHCPv6 Server address type to make the modem router assign
IPv6 addresses to hosts.
2 ) Specify the Start/End IPv6 Address for the IPv6 suffixes. The modem router will
generate IPv6 addresses within the specified range.
3 ) Keep Leased Time as the default value.
4 ) Keep Site Prefix Type as the default value Delegated. If your ISP has provided a
specific IPv6 site prefix, select Static and enter the prefix.
5 ) Keep WAN Connection as the default value.
4. Click Save to make the settings effective.
13. 3. DSL Settings
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to Advanced > Network > DSL Settings page.
3. Select a DSL Modulation Type/Annex Type from the drop-down list. Do not change
the default settings unless necessary.
To Next Page
Loading...
