300Mbps Wireless N USB VDSL2 Modem Router User Guide
Figure 4-116
Traffic Statistics: Enable or Disable. The default value is disabled. To enable it, click Enable.
If it is disabled, the function of DoS protection in Security settings will be disabled.
Statistics Interval (5-60): The default value is 10. Select a value between 5 and 60 seconds
in the drop-down list. The Packets Statistic interval indicates the time section of the packets
statistic.
Click Reset All to reset the values of all the entries to zero.
Click Delete All to delete all entries in the table.
Click the Refresh button to refresh immediately.
Statistics Table:
IP/MAC Address The IP and MAC address are displayed with related statistics.
Total
Packets
The total number
of packets received and transmitted by the
modem router.
Bytes
The total number
of bytes received and transmitted by the
modem router.
Current
Packets
The total number of packets received and transmitted in the last
Packets Statistic interval seconds.
Bytes
The total number of bytes received and transmitted in the last
Packets Statistic interval seconds.
ICMP
Tx
The number of the ICMP packets transmitted to WAN per second
at the specified Packets Statistics interval. It is shown like
“current transmitting rate / Max transmitting rate”.
UDP Tx
T
he number of UDP packets transmitted to the WAN per second
at the specified Packets Statistics interval. I
“current transmitting rate / Max transmitting rate”.
SYN Tx
The nu
mber of TCP SYN packets transmitted to the WAN per
second at the specified Packets Statistics interval. It is shown like
“current transmitting rate / Max transmitting rate”.
Operation
Reset Reset the value of the entry to zero.
Delete Delete the existing entry in the table.
108
To Next Page
Loading...
